Ashtech ProMark 200 Especificaciones descargar pdf (Pagina 37)

English

•On the GNSS tab, make sure the “Internal” GNSS receiver

is selected. Ignore the Port field.

• Tap on the Antenna tab,

• Select “Vertical” and enter the antenna height, which in

this case corresponds to the pole or bipod length.

If you are using a fixed-height pole, just enter this height.

if you are using a height-adjustable pole or bipod, read the

graduation on this device, and then enter the read value

in the Antenna Height field.

• Select the antenna type used.

• Tap on the Link tab and select the option through which

RTK corrections will be delivered to the receiver. All these

settings are fully described in the Handheld Platform for

MobileMapper 100, ProMark 100 & ProMark 200 Getting

Started Guide (GNSS Toolbox - Differential mode).

• Recording tab: Although specific to post-processed

projects, there is no reason why you could not log raw data

while you run your real-time RTK project. Raw data

logging can indeed be run in parallel if you wish to double

check your real-time centimeter positions with those

obtained later through post-processing. If that is what you

want to do, set the Recording tab accordingly.

•Tap OK to complete the rover configuration step. Tap OK

again to return to the map screen.

• Select Menu>Initialize and choose your initialization

method/

– If you select “On the Fly”, or “From Bar”, nothing else

needs to be done at this stage.

– If you select “From Known Point”, choose that point

from the displayed list and stay there for a while.

– If you select “From Bar”, keep the rover antenna on the

bar for a while, then carefully move this antenna to the

top of the pole or bipod, taking care not to mask it.

– If you select “Statically”, stay immobile for a while

with your rover.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 59 60

Sin comentarios

Ashtech ProMark 200 Especificaciones Pagina 37