Ashtech Z-FX Manual de servicio descargar pdf (Pagina 60)

48 Z-Surveyor & Z-FX Operation Manual

STATIC

• SITE (SITE:****)

Sets the four character SITE name.

• Antenna Height (ANT HT:**.****m)

Sets the height of the GPS antenna

• Survey Status (STATUS)

STATUS is a submenu with the information described in Table 4.3:

KINEMATIC

• SITE (SITE:****)

Sets the four character SITE name.

• Epoch Log counter (LOG #:***)

If the epoch counter in the SURVCONF menu has been set to a value

other than 0 and the SITE has been entered (which must be done after

the user has set the antenna on the desired point), the display enters the

LOG # screen and the log counter begins decrementing starting from the

Table 4.3: Survey Status Information

Menu Item Description Description

Current Position LAT:N/S**º**’**.*****”

LON:E/W***º**’**.*****”

ALT:*****.**m

The position displayed is the autonomous

position or the RTCM code differential

position, but not the RTK or CPD position.

Position Dilution

of Precision

PDOP: **.*

Displays PDOP of current constellation used

for position solution.

#Satellites

recorded (on L1

and L2)

#USED: **

Number of satellites being recorded on

PCMCIA card (healthy and above the

recording elevation mask).

Time

CNT/GPS/UTC **:**:**

Displays current time. Table 4.4 describes the

different types of time the receiver can

display.

Table 4.4: Time Displays

Time Description

CNT Time of the receiver’s internal clock. Displayed until receiver locks to first

satellite.

GPS Time displayed after receiver locks to first satellite.

UTC Time displayed after receiver collects UTC corrections from satellite.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 93 94

Comentarios a estos manuales

Sin comentarios

Ashtech Z-FX Manual de servicio Pagina 60

Comentarios a estos manuales

Relacionado con productos y manuales para Navegadores Ashtech Z-FX